PMT Controllers Settings Panel

PMT Controller Settings


PMT NameEnter a name for the PMT.
DeviceSelect the NI-DAQ device used to control the associated PMT channel.
Gain AO Channel

Select the Analog Output (AO) channel used to control the gain for each PMT.

If select "None", the gain functionality is disabled.

Power DO Channel

Select the Digital port used to switch each PMT on/off.

If select "None", the power functionality is disabled.

Tripped DI Channel

Select the Digital port used to detect the trip status for each PMT.

If select "None", the trip detection functionality is disabled.

Trip Reset DO Channel

Select the Digital port used to reset the trip status for each PMT.

If select "None", the trip reset functionality is disabled.

Min Control Voltage

Enter the minimum analog output voltage on the NI-DAQ board that controls the PMT gain.

An entry is required if an Analog Output (AO) channel is selected for Gain AO Channel (above).        

Max Control Voltage

Enter the maximum analog output voltage on the NI-DAQ board that controls the PMT gain.

An entry is required if an Analog Output (AO) channel is selected for Gain AO Channel (above).    
Max Gain

Enter the maximum display value for the PMT gain.

An entry is required if an Analog Output (AO) channel is selected for Gain AO Channel (above).                           

DeleteTo delete a row, press the "X" on the row you want deleted.

 

 

Attachments: